Cleaning the Machine
■For D440/420
4 | Press [ |
|
| ] or [ | ] to select <FIX. UNIT | |
|
| |||||
CLEANING>, then press [OK]. | ||||||
|
|
| ||||
|
| A D J U S T . / C L E A N I N G | ||||
|
| 1 | F I X . U N I T C L E A N I N G | |||
|
|
|
|
|
|
|
Cleaning starts.
Throw away the cleaning paper after use.
Maintenance | Scanning Area |
|
Keep the scanning area clean to avoid dirty copies.
When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord. Failure to observe these steps may result in a fire or electrical shock.
●Platen Glass
Clean the platen glass and the underside of the ADF by following the procedure below.
1 | Turn OFF the main power switch and |
disconnect the power cord. |
2 | Open the ADF. |
3 | Clean the platen glass and the underside |
of the ADF with a cloth dampened with |
water. Then, wipe the area with a soft, dry cloth.
Do not dampen the cloth too much, as this may tear the document or damage the machine.