32Playback 
NOTES
When you wake up the camcorder from standby mode, the following settings will be changed automatically:
-Manual focus returns to automatic focus (AF).
-Manual exposure adjustment returns to automatic exposure.
-Zoom position returns to full wide angle W. In standby mode, the camcorder consumes
only half the power used in record pause mode. Using this mode you can save energy when using a battery pack.
The camcorder will shut off if left in the Quick- Start ready mode for 10 minutes, regardless of the [POWER SAVE] setting (
41). You can select the length of time until
[
STANDBY OFF] setting (
41).
To restore the power if the camcorder shut off, slide the power switch toward MODE and
release it, or move the power switch to 
and back to ON again.
If you perform any of the following actions while in standby mode (while the standby lamp is on), the camcorder will return to record pause mode.
-Open the disc compartment cover.
-Slide the power switch toward MODE.
-Change the position of the 
/
switch.
Playback
Playing Back the Video
(
12)
1Move the power switch to ON, then slide it down toward MODE and release it to set the camcorder in PLAY mode.
The green PLAY indicator will turn on.
2Move the 
/
switch to the 
(Movies) position.
The scene index screen appears with the selection frame on the first scene.
3Move (
, 
) the selection frame to the scene you want to play back.
Press 
or 
on the camcorder to move to the next/previous index page.
4Press /
to begin the playback. The playback will start from the scene selected and continue until the end of the last scene recorded.
DURING PLAYBACK
5 Press /
again to pause the playback.
6Press 
to stop the playback and return to the scene index screen.
NOTES
During the playback of a