34Playback 
IMPORTANT
The following may not be displayed correctly.
-Images not recorded with this camcorder.
-Images edited on or uploaded from a computer.
-Images whose file names have been changed.
Avoid the following actions while the disc
access display (
) appears on screen, and when the DISC access indicator is on or flashing. Failing to do so may result in permanent data loss.
-Do not subject the camcorder to vibrations or strong impacts.
-Do not open the disc cover and do not remove the disc.
-Do not disconnect the power source or turn off the camcorder.
-Do not change the position of the 
/
switch or the operating mode.
SLIDESHOW
FUNC.
( 
25)
1 Press FUNC. .
2Select (
) [
SLIDESHOW] and press (
).3Select (
) [START] and press ( 
).•Images are played back one after another.
•Press FUNC. to stop the slideshow.
Index Screen1Move the zoom lever toward W.The still images index screen appears.
2Select (
, 
) an image.•Move the green selection frame to the image you want to view.
•If you have a lot of still images, you may find it easier to browse entire index pages instead. Move the zoom
lever toward W to extend the green selection frame to the whole page, and move (
) between index pages. Move the zoom lever toward T to return to moving between single images.
3Move the zoom lever toward T. The index screen closes and the selected image is displayed.
Image Jump FunctionYou can also quickly locate a specific image without having to browse all of them one by one.
TO RUN THROUGH THE STILL IMAGES
Push the joystick (
) or (
) and hold it pressed down to run quickly through the still images.
TO SKIP 10 OR 100 STILL IMAGES
1If the joystick guide does not appear on screen, press (
) to display it.
2Push the joystick (
) toward 
.
) [
JUMP 10 IMAGES] or [
JUMP 100 IMAGES].4Jump (
) the number of images selected.Press ( 
) to close the image jump screen and display the image. You can
press ( 
) again to hide the joystick guide.