Trouble? 71

Message

 

Explanation

 

 

 

 

 

CANNOT READ THE DISC

Disc could not be read. Try cleaning it or replace the disc.

73

CHECK THE DISC

 

 

 

 

This message can also appear if the camcorder has exceeded its

–

 

 

operational temperature. Turn off the camcorder and let it cool

 

 

 

down before resuming use.

 

 

 

This message can also appear if condensation has formed. Wait

74

 

until the camcorder dries completely before resuming use.

 

 

 

The disc may not be loaded correctly. Try removing the disc and

22

 

reinserting it.

 

 

 

• ACCESS ERROR

There was an error when reading the disc or attempting to write

73

• DISC ACCESS FAILURE

onto it. Try cleaning the disc or replace it.

 

 

CHECK THE DISC

This message can also appear if condensation has formed. Wait

74

 

 

until the camcorder dries completely before resuming use.

 

 

 

The disc may not be loaded correctly. Try removing the disc and

22

 

reinserting it.

 

 

 

DISC COVER IS OPEN

Verify the disc is correctly inserted and close the disc cover.

22

NO DISC

No disc is loaded. Insert a disc.

22

 

This message can also appear if condensation has formed. Wait

74

 

until the camcorder dries completely before resuming use.

 

 

LOADING THE DISC

The disc is being read. Wait before you start recording.

–

AVOID MOVING THE

Try not to move the camcorder while the image is being recorded.

–

CAMCORDER

 

 

 

 

UNABLE TO RECOVER

Could not recover a corrupted file.

–

DATA

 

 

 

 

This message can also appear if condensation has formed. If you

74

 

 

suspect condensation is the reason, do not initialize the disc and

 

 

 

wait until the camcorder dries completely before resuming use.

 

 

DISC FULL

The disc is full (“ END” flashes on the screen). Delete some

22

 

recordings (DVD-RW in VR mode) to free some space or replace

55

 

the disc.

 

 

 

TASK IN PROGRESS

The camcorder is updating important file allocation data on the disc.

–

DO NOT DISCONNECT

Do not disconnect the compact power adapter or remove the

 

 

THE POWER SOURCE

battery pack.

 

 

 

NO IMAGES

No images are recorded on the disc.

–

THE CAMCORDER IS SET

You pressed the Start/Stop button while recording still images

–

TO STILL IMAGE MODE

(

mode).

 

 

NAMING ERROR

The folder and file numbers have reached their maximum value.

–

 

Set the [FILE NOS.] option to [RESET] and initialize the disc, erase

 

 

 

all the images on the disc (DVD-RW in VR mode) or replace the

 

 

 

disc.

 

 

 

Information Additional