Trouble?

67

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Solution

 

 

 

 

 

 

 

 

 

The disc cannot be ejected.

Turn off the camcorder, disconnect the compact power adapter

 

–

 

 

 

and remove the battery pack. Restore the power supply and try

 

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

The camcorder has exceeded its operational temperature. Turn

 

 

 

 

 

 

off the camcorder and let it cool down before resuming use.

 

 

 

 

The disc cannot be recognized.

The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If

 

73

 

 

 

the problem persists replace the disc.

 

 

 

 

 

 

The disc is not correctly loaded. Check the disc.

 

22

 

 

 

Verify that the camcorder supports the type of DVD disc you

 

5

 

 

 

inserted.

 

 

 

 

 

 

The camcorder vibrates.

Depending on the condition of the disc, the camcorder might

 

–

 

 

 

vibrate occasionally. This is not a malfunction.

 

 

 

 

•

The disc’s rotation can be

The disc is activated from time to time. This is not a malfunction.

 

–

 

 

faintly heard.

 

 

 

 

 

 

 

•

Occasionally the operation

 

 

 

 

 

 

 

 

sound can be heard.

 

 

 

 

 

 

 

After using the camcorder for a

This is not a malfunction. Turn the camcorder off and let it cool

 

–

 

long time, “ ” lights up in red.

for a while before resuming operation.

 

 

 

 

Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Solution

 

 

 

 

 

 

 

 

 

 

Image will not appear on the

Set the camcorder to

.

 

 

28

 

screen.

 

 

 

 

 

 

 

Open the lens cover.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“SET THE TIME ZONE, DATE

Set the time zone, date and time.

 

26

 

AND TIME” appears on the

Recharge the built-in lithium battery and set the time zone, date

 

73

 

screen.

 

 

and time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pressing the start/stop button

Set the camcorder to

.

 

 

28

 

will not start recording.

 

 

 

 

 

 

 

Load a recommended disc.

 

 

 

6

 

 

 

 

 

 

 

 

 

The disc is full (“ END” flashes on the screen). Delete some

 

22

 

 

 

recordings (DVD-RW in VR mode) to free some space or

 

55

 

 

 

replace the disc.

 

 

 

 

 

 

 

 

The camcorder has exceeded its operational temperature. Turn

 

–

 

 

 

off the camcorder and let it cool down before resuming use.

 

 

 

 

 

 

Remove the disc protection.

 

 

 

57

 

 

 

Unfinalize the disc (DVD-RW in VIDEO mode).

 

63

 

Even after stopping recording,

The scene or still image is being recorded on the disc. This is

 

28

 

the disc access indicator does

not a malfunction.

 

 

 

30

 

not go off.

 

 

 

 

 

 

 

The point where the start/stop

There is a slight interval between pressing the start/stop button

 

–

 

button was pressed does not

and the actual start of the recording on the disc. This is not a

 

 

 

 

match the beginning/end of the

malfunction.

 

 

 

 

 

 

recording.

 

 

 

 

 

 

Information Additional