Canon DR-6030C 14

Handling

WARNING

Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock.

•Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner.

•Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, and do not pull or excessively bend the power cord.

•Never connect the power cord when your hands are wet.

•Do not connect the scanner to a multi plug power strip.

•Do not knot or coil the power cord as this may result in a fire or electric shock. When connecting the power cord, make sure that the power plug is securely and completely inserted into the power outlet.

•Do not use power cords other than the power cord provided with this scanner.

•Never try to take the scanner apart or modify it in any way, as this is dangerous and may lead to a fire or electric shock.

•Do not use flammable aerosol sprays products near the scanner.

•When cleaning the scanner, turn the power switch OFF and disconnect the power cord from the power supply.

•Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.

•If the scanner makes strange noises, or gives off, smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the machine, immediately turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or the service representative for further information.

•Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged, immediately turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.

•Before moving the scanner, be sure to turn the power switch OFF, and disconnect the power plug from the power outlet.

CAUTION

•Do not install the scanner on a surface that is unstable or tilted, or in an area subject to excessive vibrations, as this may cause the scanner to fall, resulting in personal injury or damage to the scanner.

8Before Using the Scanner

Contents

Document Scanner User’s Guide Easy Start Guide The setup is now complete Page READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE CANON SOFTWARE LICENSE AGREEMENT Page INTRODUCTION Manuals for the Scanner Symbols Used in This Manual Contents Chapter 1 Before Using the Scanner 1. ISIS/TWAIN Driver Properties Dialog Box [Basic] Tab Sheet [Brightness] Tab Sheet [Image processing] Tab Sheet [Others] Tab Sheet Before Using the Scanner Installation Location Power Moving the Scanner Handling 1. Important Safety Instructions Page Page Page 2.Features of the DR-6030CDocument Scanner „Deskew „Auto Color Detection „Card Scan „Character Orientation Detector „Advanced Text Enhancement „Remove Binder Holes „Long Paper Compatibility „Compatible with Carbonless Duplicating Paper „Energy Saving Mode 3. Names and Functions of Parts „Rear „Interfaces 4. Installation Requirements Precautions for Use in 64-bitOperating Systems The ISIS/TWAIN driver supplied with this product supports scanning with Even with •Scanning speed may vary depending on the specifications of your computer 5. About the Setup Disc Page Using the Scanner Setting Up the Document Feed Tray Document Eject Tray Installing the Document Eject Guide How to Feed with the Page Separation 1. Documents Page 2. Preparing the Trays Using the U-TurnPath 2. Pull the document eject tray extension towards you to open it Using the Straight Path 1. Open document eject tray Page Page 3. Placing Documents Page Page Page Page 4. Scanning Documents •Scan Job •Scan to Presentation Mode CapturePerfect 3.0 Operation Procedure Page Page Page Page Page Setting the Event Function „Windows XP „Windows Vista „Windows Page Page Page Procedure for Showing the Native Interface in Custom Scan Page 5. Using Patchcode Sheets Page „PATCH T (FILE A) „PATCH II (FILE B) Page 6. Clearing a Paper Jam Page Page 7. Other Functions Double Feed Detection Function Skew Detection Function Long Document Mode Standby Mode Settings Page Long Document Mode Settings Page Page Page Page Page Page Software Setup Scanning Non-Standard-SizeDocuments 1.ISIS/TWAIN Driver Properties Dialog Box Basic Tab Sheet (ISIS/TWAIN driver) [Basic] Tab Sheet Extended Version (ISIS driver only) User Preferences Mode [Black and White] [Error Diffusion] [Advanced Text Enhancement] [Advanced Text Enhancement II] [High-SpeedText Enhancement] Page Size Dots per inch Scanning Side [Deskew] Check Box Moire Reduction Image Quality [Scan Options] (TWAIN driver only) [Area] Button [Auto Color Detection Settings] Dialog Box Color Sensitivity/Color Pixel Ratio Mode in case of binary [Scan Area] Dialog Box Scan Area Dialog Box (ISIS Driver) Scan Area Dialog Box (TWAIN Driver) Area Area Window Margin Preview Button (TWAIN driver only) [Auto] Check Box [Enable Back Side Brightness] Check Box [Enable Back Side Contrast] Check Box [Gamma] Button [Gamma Settings] Dialog Box [Custom] Check Box Select Input method [Export] Button [Reverse Image] Check Box (TWAIN driver only) [Edge Emphasis] [Document Orientation] [Text Orientation Recognition] Check Box [Erase Dot] Check Box [Prevent Bleed Through / Remove Background] Check Box Color Drop-Out [Reverse side] [Rapid Recovery System] Check Box [JPEG Transfer] Check Box Double Feed Detection Feeding Option Batch Separation (ISIS driver only) Patchcode Orientation (ISIS driver only) [Prescan] Check Box [Barcodes] Button [Addon] Button Addon Dialog Box [Addon] Check Boxes [Text] Settings Page [Orientation] [Bitmap] Settings Preview Panel [Show preview] button Text/Bitmap Settings Dialog Boxes Character String Settings for the Addon Dialog Box Bitmap Settings for the Addon Dialog Box [Horizontal Offset] [Vertical Offset] Print width First Counter Second Counter First and Second Counter Settings Dialog Boxes Start Value Increment Increment Trigger Reset Value 2. Practical Examples • To scan non-standard-sizedocuments • To scan long-pagedocuments • To register a non-standardpage size • To scan only part of the document page Page •To scan a batch of documents one page at a time • To stop the scanner when pages double feed •To scan documents with different brightness on the front and back •To reduce the moire that appears when scanning photos from magazines, etc •To rotate scanned images • To rotate images to match document text •To reverse black and white in scanned images (TWAIN driver only) •To ignore a particular color when scanning • To enhance a particular color when scanning • To skip or enhance a custom color • To enhance contours in images •To remove black areas around images • To confirm images before scanning • About the Prescan Panel • To preserve your settings for future use Page Appendices Cleaning the Sensor Glass Shading Boards, and the Rollers Removing and Attaching the Pickup Roller 1. Regular Maintenance Page Page Page Wipe both the upper and lower shading boards Page 2. Removing and Attaching the Rollers Page Page Page Page Page Removing the Pickup Roller Attaching the Pickup Roller Removing the Feed Roller Page Attaching the Feed Roller Removing the Retard Roller Page Attaching the Retard Roller Page 3. Troubleshooting The Scanner Is Not Recognized (Connecting via USB) The PC Does Not Recognize the Scanner (Connecting via SCSI) Page Page Page Page Page Symptoms The scanned image is too dark (or faint) Symptoms Double-sidedscanning is not possible Symptoms A black margin appears around the scanned document Symptoms The scanned image is skewed Symptoms Lines, smudges, or dirt appear on the scanned image Symptoms The scanned image is abnormal for certain documents Symptoms The scanned image is abnormal in some applications 4. Uninstalling Software Page Page 5. Specifications Page Page Page Index PUB. CE-IE-824 © CANON ELECTRONICS INC