3. Names and Functions of Parts

This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner.

Chapter 1

„Front (Feed Tray Open)

Document Eject Guide

Attach it to prevent thin or long documents from jamming when being scanned. (See p. 25.)

Document Eject Tray Extension

Open if the document extends beyond the edge of the eject tray. (See p. 24.)

Document Feed Tray Place the document to be scanned here. (See p. 22.)

Document Feed Tray

Extension

Pull this tray out if the document hangs over the edge of the main tray. (See p. 22.)

Document Guides Adjust them to align with the width of the document. (See p. 28 and p. 30.)

Document Eject Tray 1 Scanned documents are ejected here.

(See p. 23.)

Document Guides 2 Adjust them to align with the width of the document. (See p. 28 and p. 30.)

„Controls

 

Document Stoppers

Stop Button

Moves up and down

according to the paper feed

Push it to stop scanning.

switch lever. (See p. 27 and

 

p. 30.)

Start Button

 

Power Indicator

Push it to start scanning.

This indicator lights when

 

 

the scanner is turned ON.

Feed Selection Lever

Power Switch

Use it to change the way the documents are fed.

This switch is used to turn

Move it up (

) to continuously feed documents

the scanner on.

(page separation mode). (See p. 27.)

 

Move it down (

) to feed documents one at a time or

 

to feed documents that are fastened together, such as

 

invoices, without separating them (bypass mode).

 

(See p. 30.)

 

 

Before Using the Scanner

13