4. Installation Requirements

To use the DR-6030C, your computer must satisfy the following system requirements.

•One of the following operating systems:

-Microsoft Windows XP Professional SP3 or later

-Microsoft Windows XP Home Edition SP3 or later

-Microsoft Windows XP Professional x64 Edition SP2 or later

-Microsoft Windows Vista Home Basic SP2 or later

-Microsoft Windows Vista Home Premium SP2 or later

-Microsoft Windows Vista Business SP2 or later

-Microsoft Windows Vista Ultimate SP2 or later

-Microsoft Windows Vista Enterprise SP2 or later

-Microsoft Windows 7 Home Premium x32 Edition/x64 Edition

-Microsoft Windows 7 Professional x32 Edition/x64 Edition

-Microsoft Windows 7 Ultimate x32 Edition/x64 Edition

•A computer that meets the following specifications:

-CPU: Celeron M, 1.4 GHz or faster

-Memory: 512 MB or more

-Hard disk: 1 GB or more available space

-USB interface or SCSI board

-Monitor: Resolution of 1024 × 768 (XGA) or better recommended.

•USB interface complies with the following:

-Hi-Speed USB 2.0/USB Full-Speed (equal to USB 1.1)

•Use the following recommended SCSI cards with the scanner. SCSI cards made by Adaptec (for PCI bus)

-AVA-2915LP

-AVA-2930LP

SCSI card made by RATOC Systems (for Card bus)

- REX-CB31

•An ISIS-compatible application or a TWAIN-compatible application that is compatible with the above operating systems.

IMPORTANT

•If you do not know the requirements for your computer system, contact the store where you purchased the computer or the manufacturer of the computer for more information.

•Do not connect both a USB interface and a SCSI card at the same time.

•Note the following points when using the USB interface that was provided as standard with your computer.

-Use the most recently available USB 2.0 driver provided by Microsoft. Contact your local authorized Canon dealer for more detailed information.

Chapter 1

Before Using the Scanner

15