When [Check output after scanning] is set to [ON]
The Output Confirmation screen appears before the scanned images are output.
Change the settings for the output method if necessary and then click the output button. The name of the output button differs for each selected output method.
Hint
You can also assign any job to the Start button. If a job is assigned, the document is scanned and the scanned images are output according to the settings of the job. CaptureOnTouch ends automatically 5 seconds after the output process finishes.
Scanner Settings
By default, CaptureOnTouch scans with scanning conditions that match the document because scanning in full auto mode is enabled. If you want to specify, for example, the scanning mode and document size, you can configure the desired scanning conditions in the scanner settings.
The scanner setting items are common to Scan First and Select Scan Job.
When Scan First:
Scanning with Start Button
By default, Scan First is
Start button
For Scan First, configure the scanner settings before you start scanning.
If you place the document and press the Start button,
CaptureOnTouch launches and scanning starts.
65