•The interval between the time you press the Start button on the scanner and the time scanning begins is shortened when the [Make CaptureOnTouch resident] check box is selected in the [Basic settings] tab of the [Environmental settings] dialog box. For details, see “Environmental Settings” on p. 69.
Quitting CaptureOnTouch
To close the CaptureOnTouch window, click 
at the top of the window. This closes the window, but CaptureOnTouch will continue to reside in the system.
To quit the CaptureOnTouch application, click 
(CaptureOnTouch icon) in the taskbar, and select [Exit] from the menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the system, use one of the following procedures to restart it. CaptureOnTouch will launch and become resident in the system again.
•Open [Applications] - [Canon
•Press the Start button on the scanner (in this case, the main screen of CaptureOnTouch will open and scanning will start using the scan method assigned to the Start button).
Scan First
Operation Flow
Scan the document
▼
Configure the output settings
▼
Output the scanned images
1 Place the document in the scanner.
2 Click [Scan First].
The top screen of Scan First appears.
60