Selecting a Job and Scanning
1 Place the document in the scanner. (See p. 26)
The top screen of Select Scan Job appears.
2 Click a job.
Hint
•If you set [Check output after scanning] to [ON], you can check the output settings after scanning.
•If you set [Enable continuous scanning] to [ON], you can continue scanning after all the pages of the document are scanned.
3 Click the Start button.
The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings.
When all the pages of the document are scanned, the scanned images are output according to the registered job settings and the complete screen appears.
IMPORTANT
If you configure scanning conditions that consume a large amount of the computer’s memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again.
40