

For shooting without the flash.
•If a blinking [] icon is displayed when you press the shutter button
halfway in
Still Images

Just as with the AE lock (=49), you can lock the exposure for the flash shots.
1Set the flash to [h] (=56).2
zzAim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, press the <r> button.
zzThe flash fires, and when [(] is displayed, the flash output level is retained.
zzTo unlock FE, release the shutter button and press the <r> button again. In this case, [(] is no longer displayed.
3Compose the shot and shoot.
• FE: Flash Exposure
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.
1Configure the setting.
zzPress the <q> button, and then press the <q><r> buttons to choose [].
zz[ ] is now shown on the shooting screen (=103).
zzThe screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity.
2Shoot.
zzTo activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting Modes
PMode Playback Mode Setting Menu Accessories Appendix Index
57