Screen Brightness

Adjust screen brightness as follows.

zzChoose [LCD Brightness], and then press the <q><r> buttons to adjust the brightness.

• For maximum brightness, press and hold the <p> button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [LCD Brightness] setting on the [3] tab.) To restore the original brightness, press and hold the <p> button again for at least one second or restart the camera.

Hiding the Start-Up Screen

If you prefer, you can deactivate display of the start-up screen normally shown when you turn the camera on.

zzChoose [Start-up Image], and then choose [Off].

Formatting Memory Cards

Before using a new memory card or a card formatted in another device, you should format the card with this camera.

Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up.

An Eye-Fi card (=96) contains software on the card itself. Before formatting an Eye-Fi card, install the software on a computer.

1Access the [Format] screen. zzChoose [Format], and then press the

<m> button.

2Choose [OK].

zzPress the <o><p> buttons to choose [Cancel], press the <q><r> buttons to choose [OK], and then press the <m> button.

3Format the memory card. zzTo begin the formatting process, press

the <o><p> buttons to choose [OK], and then press the <m> button.

zzWhen formatting is finished, [Memory card formatting complete] is displayed. Press the <m> button.

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

PMode Playback Mode Setting Menu Accessories Appendix Index

76