Changing the Screen Displayed after Shots

Change the way images are displayed after shots as follows.

1Set [Display Time] to [2 sec.], [4 sec.], [8 sec.], or [Hold](=58).

2Configure the setting.

zzChoose [Display Info], and then choose the desired option (=23).

Off

Displays only the image.

Detailed

Displays shooting details (=104).

• When [Display Time] (=58) is set to [Off] or [Quick], [Display Info] is set to [Off] and cannot be changed.

•By pressing the <p> button while an image is displayed after shooting, you can switch the display information. Note that the settings of [Display Info] are not changed. You can also erase images by pressing the <o> button, or protect images (=66) by pressing the <m> button.

ELPH 150 IS   IXUS 155   ELPH 140 IS   IXUS 150

Still Images

Movies

Changing the IS Mode Settings

1Access the setting screen. zzPress the <n> button, choose [IS

Settings] on the [4] tab, and then press the <m> button (=23).

2 Configure the setting.

 

zzChoose [IS Mode], and then choose the

 

desired option (=23).

 

 

Continuous

Optimal image stabilization for the shooting conditions is automatically

applied (Intelligent IS) (=29).

 

Shoot Only*

Image stabilization is active only at the moment of shooting.

Off

Deactivates image stabilization.

* The setting is changed to [Continuous] for movie recording.

•If image stabilization cannot prevent camera shake, mount the

camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

PMode Playback Mode Setting Menu Accessories Appendix Index

59