Still Images

Movies

Powering the Camera with Household Power

Powering the camera with AC Adapter Kit ACK-DC90 (sold separately) eliminates the need to monitor the remaining battery level.

1Make sure the camera is off.2 Open the cover.

zzFollow step 1 in “Inserting the Battery

Pack and Memory Card” (=12) to

open the memory card/battery cover, and then open the coupler cable port cover as shown.

3Insert the coupler.

zzInsert the coupler facing the direction shown, just as you would a battery pack (following step 2 in “Inserting the Battery Pack and Memory Card” (=12)).

Terminals

zzMake sure the coupler cable passes through the port.

Coupler Cable Port

4 Close the cover.

zzLower the cover () and hold it down as you slide it, until it clicks into the closed position ().

5Connect the power cord.

zzInsert the adapter plug into the end of the coupler cable.

zzInsert one end of the power cord into the compact power adapter, and then plug the other end into a power outlet.

zzTurn the camera on and use it as desired.

zzWhen finished, turn the camera off and unplug the power cord from the outlet.

•Do not disconnect the adapter or unplug the power cord while

the camera is still on. This may erase your shots or damage the camera.

•Do not attach the adapter or adapter cord to other objects. Doing so could result in malfunction or damage to the product.

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

PMode Playback Mode Setting Menu Accessories Appendix Index

85