Still Images

Removing All Images from a Photobook

zzFollowing the procedure in “Choosing

aSelection Method” (=95), choose [Clear All Selections] and press the <m> button.

zzPress the <q><r> buttons to choose [OK], and then press the <m> button.

Still Images

Movies

Using an Eye-Fi Card

Before using an Eye-Fi card, always confirm that local use is permitted (=2).

Inserting a prepared Eye-Fi card enables automatic wireless transfer of images to a computer or uploading to a photo-sharing website.

Images are transferred by the Eye-Fi card. Refer to the card’s user manual or contact the manufacturer for instructions on preparing and using cards or resolving transfer problems.

•When using an Eye-Fi card, keep the following points in mind.

- Cards may continue to transmit radio waves even when [Eye-Fi trans.] is set to [Disable] (=97). Remove the Eye-Fi card before entering hospitals, aircraft, or other areas where transmission is prohibited.

-When troubleshooting image transfer issues, check the card and computer settings. For details, refer to the card’s user manual.

-Poor Eye-Fi connections may cause image transfer to take a long time, and transfer may be interrupted in some cases.

-Eye-Fi cards may become hot, due to their transfer functions.

-Battery power will be consumed faster than in normal use.

-Camera operation may become sluggish. To resolve this, try setting [Eye-Fi trans.] to [Disable].

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

PMode Playback Mode Setting Menu Accessories Appendix Index

96