Using the <5> Dial
The <5> dial is used for AF point selection and selecting the desired setting on the LCD monitor. This <5> dial works only when the <7> switch is set to <1>.
There are three ways to use this <5> dial:
(1) While pressing a button, turn the 
<5> dial.
¡In this way, you can select and set various menu settings or set flash exposure compensation. When you let go of the button, the selected setting takes effect.
¡You can also review and select images on the LCD monitor with this dial.
(2) After pressing a button, turn the 
<5> dial.
When you press a button, its function remains on for 6 seconds (9). During this time, you can turn the <5> dial to set the desired setting.
After the button turns off or if you press the shutter button halfway, the camera will be ready to shoot.
¡In this way, you can select the AF point or set the exposure compensation.
(3) Turn the <5> dial only.
While turning the <5> dial, look at the setting in the viewfinder or on the top LCD panel.
¡In this way, you can set the aperture in the camera’s manual exposure mode.
30