¡ To select a vertical AF point, you can also press the <S> button, then hold down the <P> button and turn the <6> dial.

¡If two AF points (hh) light up, both AF points will be used for autofocusing. If you then select the left or right AF point, only that AF point will be active.

Manual selection limited to 11 AF points C.Fn-13-1, 2 (p.151)

¡Since the selectable AF points are limited to 11, you can better concentrate on framing the subject.

¡The AF point selection procedure is the same as explained in steps 1 and 2.

Manual selection limited to 9 AF points C.Fn-13-3(p.151)

¡The center AF point and 8 peripheral

AF points are selectable.

¡Selecting a horizontal AF point is the same as explained in steps 1 and 2. Selecting an AF point beyond a peripheral AF point will set the automatic selection mode.

¡To select a peripheral AF point, press the <S> button and turn the <5> dial.

With C.Fn-13-1/2/3, all 45 AF points will be available for automatic selection.

69