4 Press the shutter button completely.
sThe mirror will lock up and the shutter will open.
5
6
Cleaning the CMOS Sensor
¡Use a rubber blower to carefully blow away any dust on the surface of the CMOS sensor.
Exit the sensor cleaning.
¡Turn the <4> switch to <2>.
s The camera will turn off, the shutter will close, and the mirror will go back down.
¡Set the <4> switch to <1>. The camera will be ready to shoot.
¡Be sure not to turn off the camera while cleaning the CMOS sensor. If the power is turned off, the shutter will close and the shutter curtains might be damaged.
¡Use a blower not attached with a brush. The brush can scratch the CMOS sensor.
¡Do not insert the blower tip inside the camera beyond the lens mount. If the power goes out, the shutter curtains will close and the blower tip may damage then.
¡Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor.
41