Troubleshooting Guide

When I shoot still photos during movie shooting, the movie shooting stops.

Setting a lower image quality for still photos and shooting fewer continuous still photos may resolve the problem.

Time code is off.

Shooting still photos during movie shooting will cause a discrepancy between the actual time and time code. When you want to edit a movie using time code, it is recommended not to shoot still photos during movie shooting.

Wi-Fi

Wi-Fi cannot be set.

If the camera is connected to a printer, a computer, or a GPS receiver, etc. with an interface cable, Wi-Fi cannot be set ([53] tab’s [Wi-Fi] will be grayed out). Disconnect the interface cable, then set the Wi-Fi.

Operation Problems

I cannot change the setting with the <6>, <5> dial, or <9>.

Set the <R> switch to the left (lock release, p.47). Check the [8C.Fn III -3: Multi function lock] setting (p.313).

The camera button/dial’s function has changed.

Check the [8C.Fn III -5: Custom Controls] setting (p.320).

364