Using a Household Power Outlet

With AC Adapter Kit ACK-E2 (optional), you can connect the camera to a household power outlet and not worry about the battery level.

Connect the DC Coupler.

Connect the DC Coupler’s plug to the AC adapter’s socket.

Connect the power cord.

Connect the power cord to the AC adapter.

Insert the plug into a power outlet. When you are finished, disconnect the plug from the power outlet.

Place the cord in the groove.

Carefully insert the cord into the groove without damaging it.

Insert the DC Coupler.

Open the battery compartment cover and open the DC Coupler cord notch cover.

Insert the DC Coupler until the lock position and put the cord through the notch.

Close the cover.

Do not connect or disconnect the power cord while the camera’s <4> switch is set to <1> or <J>.

Page 26

Image 26

Canon EOS 5D Using a Household Power Outlet, Connect the DC Coupler, Connect the power cord, Place the cord in the groove

Contents

English Test the Camera Before Using Copyrights Item Check List ‰ Software Guide Contents Direct Printing from the Camera 121 Contents at a Glance Power Source Image Playback and Printing Safety Warnings Preventing Injury or Equipment Damage Handling Precautions Camera Care Lens Electrical Contacts LCD Panel and LCD MonitorCF Card Quick Start Guide Insert the battery. p.24Set the power switch to Attach the lens. p.27 Take the picture. p.30 Set the Mode Dial to 1 Full Auto. p.46Focus the subject. p.30 Review the picture on the LCD monitor. p.104 Nomenclature Nomenclature LCD Panel Zxbn Viewfinder Information Full Auto p.46 Battery Charger CG-580 Mode DialCamera user setting p.152 Bulb p.96 This is a battery pack charger. p.22 Battery Charger CB-5L Power cord Power cord socket Battery pack slot Red lamp This manual uses the following alert symbols Conventions Used in this Manual Getting Started Attaching the Strap Recharging the Battery Red lamp After the red lamp lights, continue to recharge Installing and Removing the Battery Battery Life Removing the Battery Open the battery compartment coverRemove the battery Temperature Shots remaining Connect the DC Coupler Using a Household Power OutletConnect the power cord Place the cord in the groove Mounting a Lens Remove the caps On the lens, set the focus mode switch to AFMounting and Detaching a Lens Attach the lens Insert the CF card Installing and Removing the CF CardInstalling the Card Open the cover Removing the CF Card Shutter Button Power SwitchBasic Operation Pressing halfway After pressing a button, turn the 6 dial 6 dial is mainly used for shooting-related settingsOperating the 6 Dial Turn the 6 dial only Turn the 5 dial only Operating the 5 DialAfter pressing a button, turn the 5 dial Operating Menu Operations Icon Color Category Description Set the desired setting Menu Setting Procedure Display the menuSelect the menu setting Select a menu item Playback menu Blue Menu SettingsShooting menu Red About the LCD Monitor Set-up menu Yellow Select Clear all camera settings Restoring the Camera’s Default SettingsNSelect Clear settings Select OK Set the desired language 3Setting the LanguageSelect Language Turn the 5 dial to select cAuto power off, then press 3Set the power-off time/Auto power offSelect Auto power off Set the desired time Select Date/Time 3Setting the Date and TimeConfirm the setting Set the date and time Tighten the battery holder screw Replacing the Date/Time BatteryTurn the 4 switch to Unscrewscrew. the battery holder Make sure the battery is in the proper + orientation 3Cleaning the Cmos sensorN Clean the image sensor Stop the cleaning Holding the Camera Dioptric AdjustmentTurn the dioptric adjustment knob Fully Automatic Shooting 1Using Full Auto Take the picture Compose the shot and press the shutter button completely Press the R button Select j JSelf-timer OperationUse the self-timer when you want to be in the picture Look at the LCD panel and turn the 6 dial to select j Image Settings Select Quality 3Setting the Image-recording QualityImage-recording Quality Settings Set the desired recording quality +73 +83 +74 +84 +76 +86 About the RAWPossible Shots Quality Max. Burst 150 120 319 200 446 Max. Burst During Continuous ShootingImage Recording Select a Picture Style 3Selecting a Picture StyleNSelect Picture Style Picture Style Effects Monochrome SymbolsAbout the Picture Style selection screen For black-and-white images Set the parameters Parameters and Their Settings3Customizing the Picture StyleN Monochrome Adjustment Select Monochrome NNone SSepia BBlue PPurple GGreen Filter effectsToning Effect Filter Sample effects Select the base Picture Style 3Registering the Picture StyleNSelect User Defined With the Picture Style selected, press Changing the Picture Style setting inadvertently Press the R button GSetting the ISO SpeedNSetting the ISO Speed While looking at the top LCD panel, turn the 5 dial Display Mode Color temperature Approx. K BSetting the White BalanceNPress the E button Select the white balance setting About White Balance Select Custom WB 3Custom White BalanceNPhotograph a white object Select the image Press the E button 3Setting the Color TemperatureNSet the color temperature On the menu, select Color temp Select WB SHIFT/BKT Press 0 to exit the setting and return to the menu3White Balance CorrectionN White Balance Correction 3White Balance Auto BracketingN Set the bracketing amount Canceling White Balance Auto Bracketing , set BKT to ±0 to 1 point Set the desired color space 3Setting the Color SpaceNSelect Color space About Adobe RGB Select Create folder 3Creating and Selecting a FolderCreating a Folder Go to the Create folder screen Create a new folder Selecting a Folder Creating Folders with a Personal Computer Select File numbering Continuous, Auto reset, or3File Numbering Methods Select the file numbering method Auto Reset Manual Reset Camera Setting Display BChecking Camera SettingsDisplay the camera settings Setting the AF, Metering, and Drive Modes FSelecting the AF ModeN One-Shot AF for Still Subjects Exposure is set at the moment the picture is taken AI Focus AF for Automatic Switching of AF Mode About Predictive AF Manual AF Point Selection SSelecting the AF PointNAutomatic AF point selection Selecting with the Multi-controller Press the S button With lenses whose maximum aperture is f/2.8 or larger Selecting with the DialLens’ Maximum Aperture and AF Sensitivity With lenses whose maximum aperture is larger than f/5.6 Focusing an Off-Center Subject Subjects difficult to focus When Autofocus Fails Manual FocusingFocus by turning the lens focusing Viewfinder Press the Q button Select the metering mode QSelecting the Metering ModeN ISelecting the Drive ModeN Press the R button Select the drive modeSelf-timer Operation p.48 Single shooting Advanced Operations Set the Mode Dial to d Focus the subject DProgram AE Image-Recording Settings Shooting SettingsFlash Settings EX-series Speedlite Differences Between d and 1 Full Auto Check the viewfinder display and shoot Set the Mode Dial to s Set the desired shutter speedSShutter-Priority AE Shutter Speed Display Checkshoot. the viewfinder display Set the Mode Dial to f Set the desired aperture valueFAperture-Priority AE Depth of Field PreviewN Aperture Value Display Set the Mode Dial to a Set the desired shutter speed AManual Exposure Set the exposure Setting Exposure CompensationN Set the Mode Dial to d, s, or f Select AEB Current drive mode p.82 will be used for the shooting3Auto Exposure Bracketing Aebn Set the AEB amount Canceling AEB Recompose and take the picture AAE LockNPress the a button Look at the LCD panel and turn the 6 dial Set the Mode Dial to k Set the desired aperture valueBulb Exposures Again press the shutter button completely Mirror LockupNPress the shutter button completely Mirror will swing up Remove the eyecup Using the Eyepiece CoverUlcd Panel Illumination Attaching the Eyepiece Cover Select Beep 3You can also silence the beeper3CF Card Reminder Select Off 100 Flash PhotographyWith EX-series Speedlites 101 TTL II Wireless Autoflash with Multiple SpeedlitesTTL and A-TTL Autoflash Speedlites PC Terminal Using Non-Canon Flash UnitsSync Speed 102 103 For images taken with another camera Set the desired review time 3Setting the Image Review TimeSelect Review time 104 Select On 3Auto Image RotationSelect Auto rotate Take a vertical shot Select LCD brightness 3Setting the LCD BrightnessAdjust the brightness 106 107 Image PlaybackXSingle image display Playback the image 108 Shooting Information Display3AF Point Display Highlight Alert RGB Display HistogramBright. Display 109 Set the camera for playback Switching from the index display to another display formatHIndex Display Display the index images Magnify the image YMagnified ViewDisplay the image Scroll around the image Start the auto play 3Automated Playback of Images Auto playbackSelect Auto play Stop the auto play Rotate the image 3Rotating an ImageSelect Rotate 113 Jump forward or back CJump DisplayPlayback the image Go to the jump display Single Image and Information Display Jump shot date Jumping in the index display mode115 Jump folder 116 Viewing the Images on a TVConnect the camera to the TV Protect the image 3Protecting ImagesSelect Protect 117 Select the image to be erased LErasing ImagesErasing a Single Image Display the image Display the erase menu Erase the images Erasing All Images Display the imageSelect All 119 Format the CF card 3Formatting the CF CardSelect Format 120 Direct Printing from the Camera 122 Conventions Used in this ChapterCanon’s PictBridge Web Site Select Print/PTP Setting the Camera Select CommunicationPreparing to Print 123 124 Turn on the printer Turn the camera’s 4 switch to 1 or JConnectprinter. the camera to Printers and Cables Icon Reference pages 126 133 134 136 137 139 125WPictBridge ACP Direct SBubble Jet Direct Select the image to be printed Select Paper settingsWPrinting with PictBridge Press USetting the Layout Setting the Paper SizeYSetting the Paper Type About the Paper Types About Page Layout Set the printing effects128 129 Adjustment of Printing EffectsPrinting Adjustments k Adjustable Off / On / Vivid Natural M Brightness Adjust levels130 Brightener Red-eye corr 131 Detail Settings of Printing EffectsTurn the 5 dial to adjust the level, then press Contrast Saturation Color tone Start printing Setting the date and file number imprintingSet the number of copies 132 Handling Printer Errors Error Messages 133 134 APrinting with CP DirectSelect Style Image Borders Date Set the options as desired135 Set as necessary For details on trimming, see Set the trimming136 SPrinting with Bubble Jet Direct Print setting screenPrint setting screen will appear 137 138 Paper Borders Date 139 Trim the image Setting the TrimmingSelect Trimming 140 On the upper left, you can see 141Press Trimmed image area that will be Blue lamp will blink and printing will start Easy Printing142 143 About Dpof 3Print Ordering Print SettingsSelect Set up Select Print order 145 Press the M button 146 Selecting Individual Images for Printing Select OrderOrder the print For Standard and Both Menu will then reappear 147For Index 148 Selecting All imagesSelect Mark all Select Print 3Direct Printing with DpofPrepare to print Set the printing options Set the Style. p.134/137 ACP Direct / SBubble Jet Direct150 151 Custom Functions work in all modes except 1 Full Auto Menu settings 3Register Camera SettingsNSelect Register camera settings 152 Select Custom Functions C.Fn 3Setting a Custom FunctionNChange the setting Select Custom Function No 154 Resetting All Custom FunctionsN Select Clear settingsSelect Clear all Custom Functions 3Custom Function SettingsN 155 156 157 +/Enable+/Disable Auto cancel works only if the flash is ready Fires Does not fire 158 Average 159Evaluative 1st-curtain sync 2nd-curtain sync With Shutter Button only Also with Aetc 160Standard Expanded AE lock while metering 161AF stop AF start AF point M Auto / Auto ctr Ee-A Standard Precision Matte Ee-A Ee-D Ee-S About focusing screen characteristics162 Reference AE lock Shooting CombinationsAF Modes and Drive Modes 164 Program Line Description Program Line165 Troubleshooting Guide 166 167 Camera turns off by itself Auto power off is in effectLCD’s service life has expired CF card is full 168 169 Error CodesError Code Countermeasures Err Major Accessories Optional 170 171 172 Bundled AccessoriesSystem Map AC Adapter Kit 173 System Map Specifications 174 175 White Balance 176 Exposure Control 177 Drive System 178 Customization 179 European Union and EEA only Index 180 181 111 182 146Page CEL-SF0LA211