Name

Description

Settings

TEL LINE TYPE*

Set the dialling method the fax uses to match the type of

TOUCH TONE/

 

phone line you have.

ROTARY PULSE**

PSTN/PBX SET

Sets the type of the PBX through which your fax is connected.

PSTN/PBX

PSTN

Your fax is connected to the outside line.

 

PBX

Your fax is connected through a PBX.

 

 

You can set the type of the PBX among PREFIX, HOOKING and

 

 

EARTH CONNECTION. If you select PREFIX, you can set the

 

 

number up to 19-digits that will access the outside line.

 

 

If set to PBX, the [05] button cannot be used for One-touch

 

 

Speed Dialling.

 

M-KEY SETTING

Enable/disable the M–key setting. When set to ON, the [10]

ON/OFF

(UK only)

button cannot be used for One-touch Speed Dialling.

 

 

Set an access code and ID code for the UK Call, Global Call, or

 

 

Day Call Service of Cable and Wireless Communications

 

 

Limited, p. 42.

 

ACCESS CODE

Set an access code up to 19 digits.

–

ID CODE

Set an ID code up to 19 digits.

–

 

 

 

*TEL LINE TYPE cannot be set in Norway and Denmark.

**TOUCH TONE is the factory setting in the UK, Australia, New Zealand and Singapore.

REPORT SETTINGS

Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.

Name

Description

Settings

TX REPORT

Enable/disable automatic printing of the transmission report.

OUTPUT YES/

 

OUTPUT YES sets the fax to print an activity report every

PRINT ERROR ONLY/

 

time you send a document.

OUTPUT NO

 

PRINT ERROR ONLY prints only when a transmission error

 

 

occurs.

 

 

OUTPUT NO turns off the activity report feature.

 

TX CONFIRM REP.

When you set TX REPORT to OUTPUT YES or PRINT ERROR

OUTPUT YES/

 

ONLY, you can add to the TX report half of the first page of

OUTPUT NO

 

the document that was being sent. This can help remind you

 

 

which document was being sent. Valid only for memory

 

 

transmissions.

 

 

 

 

RX REPORT

Enable/disable automatic printing of the reception report.

OUTPUT YES/

 

OUTPUT YES sets the fax to print an activity report every

PRINT ERROR ONLY/

 

time you receive a document.

OUTPUT NO

 

PRINT ERROR ONLY prints only when an error occurs during

 

 

receiving.

 

 

OUTPUT NO turns off the activity report feature.

 

 

 

 

ACTIVITY REPORT

Enable/disable automatic printing of the activity report.

 

AUTO PRINT

When you set OUTPUT YES, your fax is set to print an

OUTPUT YES/

 

activity management report for every 20 transactions

OUTPUT NO

 

(sending and receiving).

 

TX/RX SEPARATE

Divide the activity management report into sending and

ON/OFF

 

receiving transactions.

 

 

 

 

INKSAVER

Enable/disable economy printing (ink saving feature) when

ON/OFF

 

printing reports.

 

86