Photos

•The (print/share) button lights up and the current print settings will be displayed for approx.

6 seconds.

IMPORTANT

•If continues to flash (for more than 1

minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection.

•During the following operations, even if you connect a printer to the camcorder it will not be recognized.

-Erasing all photos

-Erasing all transfer orders

-Erasing all print orders

NOTES

• will appear for photos that cannot be printed.

•We recommend powering the camcorder using the compact power adapter.

•Refer also to the printer’s instruction manual.

•If you have no intention to use the optional DW-100 DVD Burner, you can

set [USB SETTING] to [ PC/PRINTER] ( 83) so the device selection screen does not appear every time you connect the camcorder to a printer.

•Connection to a PictBridge-compatible printer will not work when the memory card contains 1,800 photos or more.

•For best performance, we recommend keeping the number of photos on the memory card under 100.

•Disconnect the USB cable before changing the operating mode.

Printing with the (Print/Share) Button

You can print a photo without changing

the settings simply by pressing .

1Select ( ) the photo you wish to print.

2Press .

•Printing starts. The button flashes and stays on when the printing is completed.

•To continue printing, select ( ) another photo.

Selecting the Print Settings

You can select the number of copies and other settings for printing. The setting options vary depending on your printer model.

( 21)

64