4Press the start button on the DVD burner.

•A progress bar will be displayed on the screen.

•After pressing the start button (while the current disc is being written) the operation cannot be canceled.

•When the disc (or the last disc, if the data requires multiple discs) is finalized, [TASK COMPLETED] will be displayed. Take out the disc and close the disc tray.

WHEN THE DATA REQUIRES MULTIPLE DISCS

After a disc is finalized it will be ejected automatically and [INSERT A NEW/

BLANK DISC AND CLOSE THE DISC TRAY] will appear. Insert the next disc and close the disc tray.

TO CREATE AN ADDITIONAL COPY OF THE SAME DISC

After the operation is finished, [INSERT A NEW/BLANK DISC] will be displayed again. Insert a brand new disc and close the disc tray.

TO PLAY BACK A DVD DISC

Discs created with this camcorder and the DVD burner can be played back on DVD players and computers that meet the following requirements:

•Compatible with the discs you created (DVD-R/DVD-R DL/DVD-RW discs)

•Compatible with DVD-Video specifications

•DVD playback software that is installed and running (in the case of

computers)

Refer to the instruction manual of the external device and make sure it is compatible.

IMPORTANT

•While the camcorder is connected to the DVD burner, do not open the memory card slot cover and do not remove the memory card.

•Observe the following precautions while the ACCESS indicator on the camcorder is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the power source or turn off the camcorder or the DVD burner.

•When creating discs with the optional DW-100 DVD Burner, you cannot add, using the [PLAYLIST] option, scenes recorded while the pre-recording function was on or divided scenes.

•For important information on handling

your discs, refer to Cautions on handling.

NOTES

•If the LOCK switch on the memory card is set to prevent writing, you will not be able to create a disc with movies on the memory card.

•The FUNC. menu and setup menus cannot be accessed while the camcorder is connected to the DVD burner.

•Disconnect the USB cable before changing the operating mode.

•The amount of time required for step 2 depends on how many scenes are being

73