Canon GL1 instruction manual Setting the clock

E

16
				1			4
	19				2
	18	20		24
	17						3			6	7		9		10
15
												8
		21						5
14				23
															12
			22												11
															13
14 15	16 17 18 19	20 21	22	23 24	1	2	3	4	5	6	7	8	9	10	11 12 13

Using the Full Range of Features

No.	Time zone	No.	Time zone
	LONDON		WELLGTN (Wellington)
	PARIS		SAMOA
	CAIRO		HONOLU (Honolulu)
	MOSCOW		ANCHOR (Anchorage)
	DUBAI		L.A. (Los Angeles)
	KARACHI		DENVER
	DACCA		CHICAGO
	BANGKOK		N.Y. (New York)
	H. KONG (Hong Kong)		CARACAS
	TOKYO		RIO (Rio de Janeiro)
	SYDNEY		FERNAN. (Fernando de Noronha)
	SOLOMON		AZORES

Note:

•After you have selected your time zone and set the date and time, when you travel to another time zone, there is no need to reset the date and time. Just set the time zone to your destination’s representative city and the camera’s clock will automatically change to display the correct time for your destination.

Setting the clock

(see p. 34)	D/TIME SET¥¥DEC. 1,1999
	10:00 AM

1.Put the camera in record pause mode.

2.Open the menu and select D/TIME SET.

•The year display starts to flash.

3.Turn the menu dial up and down to change the year. Press the dial in to move to another part of the display.

•Once you move from the year, the next part of the display starts flashing.

4.Set the month, day, hours, and minutes in the same way.

5.Press the MENU button when finished, and to start the clock.

•The date can be set to any year between 1999 and 2020.

•If you press the MENU button in the middle of setting the date and time the seconds are set to zero, you leave the menu, and the clock starts.

•If you press the menu dial in after setting the minutes you can set the date and time again from the start.

40