Canon GL1 Recording Over Existing Scenes A/V Insert Editing, Tape in the camera, Playback tape

E

Recording Over Existing Scenes (A/V Insert Editing)

You can insert new scenes from your VCR or other camcorder onto your pre-recorded tape using the GL1’s analog line-in or DV in terminals. Original video and audio will be replaced with the new video and audio.

OUTPUT

		S-150 S-video Cable	S-VIDEO
DV
IN/OUT
			VIDEO
A/V			AUDIO
			L	A/V
	IN/			INSERT
	OUT		R

STV-250N

Stereo Video Cable

The tape in the camera:

When using the GL1’s A/V insert function, only record to tapes recorded in SP mode with continuously recorded time codes.

If there are non-recorded portions or portions recorded in LP mode on the tape, recording may be interrupted or you may not be able to insert A/V correctly.

The playback tape:

Use only tapes without non-recorded portions.

If there are non-recorded portions or changes in the recording mode, you may not be able to insert A/V correctly.

You cannot insert A/V in the following cases:

•The playback tape has been poorly recorded.

•During special playback: fast forward playback, rewind playback or slow playback etc.

TV:

You cannot insert A/V from a TV program with anomalous synchronized signals, such as when the program itself received poor signals.

Editing

78