Using the Zebra Pattern
E
The zebra pattern is a series of diagonal stripes that appear in the viewfinder to highlight areas of overexposure. Use it as a guide to set the aperture (iris) and shutter speed.
You can also select the pattern appearance level from 80, 85, 90, 95, and 100%.
Selecting the Zebra Pattern Level
TAPE + | CAMERA | , | CARD + CAMERA |
|
|
| |
| CAM. SET UP | ZEBRA LEVEL• 90 | |
( 
20)
1.Open the menu and select CAM. SET UP.
2.Select ZEBRA LEVEL and select the level.
3.Close the menu.
Activating the Zebra Pattern
TAPE + | CAMERA | , | CARD + CAMERA |
|
|
| |
| CAM. SET UP | ZEBRA••••••• OFF | |
( | 20) |
1.Open the menu and select CAM. SET UP.
2.Select ZEBRA LEVEL and set it to ON.
3.Close the menu.
Note:
• The camcorder does not record the zebra pattern, it is only shown in the display.
Recording
85
