E

Operating Wipe and Overlap

When operating faders in TAPE CAMERA mode, make sure the program selector is set to Q.

TAPE + CAMERA

Recording

FADER

FADER••••••• OVERLAP

( 20)

1.Press the D.EFFECTS/BARS SELECT button.

The digital effects menu appears.

2.Select FADER and press the SELECT dial in.

FADE-T, WIPE and OVERLAP settings appear.

3.Select WIPE or OVERLAP and press the D.EFFECTS/BARS SELECT button.

The menu closes and the name of the selected fader flashes in the display.

4.Press the D.EFFECTS/BARS ON/OFF button during recording.

The name of your selection stops flashing.

Each time you press the D.EFFECTS ON/OFF button, the chosen fader becomes activated (display lights continuously) or deactivated (display flashes).

During recording

5.Press the start/stop button.

The last scene is memorized as a still image and the camcorder goes into record pause mode.

6.Press the start /stop button.

Recording starts, and the still image gradually changes to the scene you are recording.

64

Page 64
Image 64
Canon GL2 instruction manual Operating Wipe and Overlap