Canon HF M40, HF M400, HF M41 Converting Only Part of a Scene or Story, •When converting scenes from a story:

Converting Scenes into Standard Definition from a Story by Rating

1Open the gallery and bring the desired story to the front.

[b] 8[ Gallery] 8Desired story

•Check that you have selected the ftab (built-in memory) or 4 tab (memory card X).

2 Select the rating of the stories you want to convert.

[Story Details] 8[Play by Rating] 8Desired rating 8 [f]

3Press Zand continue the conversion to standard definition from step 5 in the previous procedure (0140).

NOTES

•When converting scenes from a story:

-All the scenes are merged into one converted SD movie.

-If the converted SD movie is too large, it will be split into smaller 10- minute long movies.

-The maximum total playback time of the scenes to be converted is 2 hours and 30 minutes.

Converting Only Part of a Scene or Story

1Play back the scene or story that you want to partially convert.

Check that you have selected a scene recorded in the built-in memory or on memory card X.

2Pause the playback where you want the converted SD movie to begin.

3Press Zand continue the conversion to standard definition from step 5 in the previous procedure (0140).

The video from the playback pause until the end of the scene/story (or up to a maximum of 10 minutes, in case of longer scenes/stories) will be converted to standard definition.

External Connections Š 143