Canon HF M40, HF M400, HF M41 Grip Belt and Straps, To remove the grip belt

You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

NOTES

•The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

Grip Belt and Straps

Fasten the grip belt.

Adjust the grip belt so that you can reach the zoom lever with your index finger, and the gbutton with your thumb.

You can attach the supplied stylus pen to the grip belt.

To remove the grip belt

1Lift the padded handgrip’s flap and detach the strap from the Velcro pad.

2Pull the strap to remove it first from the front bracket on the camcorder, then to unthread it from the handgrip and finally to remove it from the rear bracket on the camcorder.

Preparations Š 27