Mem. Card Number of scenes already at maximum

-The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (061) to free some space.

Mem. Card Unable to recognize the data

-The memory card contains scenes recorded using a video configuration that is not supported (PAL or SECAM). Play back the recordings in the memory card with the device originally used to record them.

Memory card cover is open

- After inserting a memory card, close the double memory card slot cover.

Memory card is full

-The memory card is full. Delete some recordings (061, 123) to free some space or replace the memory card.

Memory card is write-protected

- The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.

Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.

- This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch.

No memory card

- Insert a compatible memory card into the camcorder (041).

No photos

- There are no photos to play back. Have fun taking some photos (046).

No scenes

- There are no scenes in the memory selected. Have fun shooting some video (046).

Not enough available space

-Delete some recordings on the memory card (061, 123) or select the [3 Mbps] bit rate for the conversion to SD.

Number of scenes already at maximum

-The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes (061) to free some space.

Number of stories already at maximum

-The gallery already contains the maximum number of stories (98 stories in any one given memory). Delete some stories (063) or change the recording memory for movies (042).

176 Š Additional Information