Capturing Video Snapshot Scenes and Photos from a Movie

You can capture video snapshot scenes or photos from a previously recorded scene. For example, you may want to print photos from video recorded at a party or create a small video clip using video snapshot scenes from the highlights of an event.

Operating modes:

Capturing a Video Snapshot Scene

1Play back the scene or story from which you want to capture the video snapshot scene.

2Press Yto capture the video snapshot scene. The camcorder captures the video snapshot scene for about 4 seconds (the blue frame serves as a visual progress bar), and then

enters playback pause mode. You can change the length of the video snapshot scenes you capture to 2 or 8 seconds with the r> [Video Snapshot Length] setting.

3 Touch [Ñ] to stop the playback.

NOTES

•A video snapshot scene can be captured only during playback; it can- not be captured during playback pause mode.

•The captured video snapshot scene is saved to the same memory that contains the source scene.

•Video snapshot scenes cannot be captured from any of the following types of scenes.

-Scenes shorter than 1 second

-*/)/(Scenes that were edited using the supplied software VideoBrowser and were then transferred to a memory card connected to the computer.

•When the source scene is itself a video snapshot scene, you may not be able to capture a video snapshot scene depending on the length of the source scene and the length currently selected for video snapshot scenes.

112 Š Video