Menu Options Lists 41
This setting will be unavailable while the camcorder is connected to an external device using the HDMI cable.
OUTPUT CH[
L/R], [
L/L], [
R/R]
You can select the audio channel to use during the playback of a tape with audio recorded on two channels.
[
L/R]: Left and Right channels (stereo) / Main + Sub tracks (bilingual).
[
L/L]: Left channel only (stereo) / Main track only (bilingual).
[
R/R]: Right channel only (stereo) / Sub track only (bilingual).
[
STEREO1], [
STEREO2], [
MIX/FIXED], [
MIX/VAR.] You can select the audio track to use during the playback of a tape with audio dubbed over the recording.
[
STEREO1]: Original sound only.
[ STEREO2]: Dubbed audio only.
[
MIX/FIXED]: Mixed audio with the original sound and dubbed audio at the same level.
[
MIX/VAR.]: Mixed audio where the balance between the original sound (
) and the dubbed audio ( 
) can be adjusted.
When [AUDIO OUT] is set to [
MIX/ VAR.], adjust (
) the sound balance with the joystick.
The camcorder will retain the audio balance adjustment; however if you turn
off the camcorder, [AUDIO OUT] will be reset to [
STEREO1].
| AV/PHONES | ( | 30) |
[
AV], [
PHONES]
*
When [AV/PHONES] is set to
[
PHONES], adjust ( 
) the volume of the headphones with the joystick.
*In 
mode, adjust the volume using the joystick guide (
31).
480i], [
1080i/480i]You can select the video specifications to use when connecting the camcorder to a
[
480i]: To use the 480i specification (standard definition).
[
1080i/480i]: To use the full 1080i high definition specification when possible, or switch automatically to 480i specification when 1080i is not supported by the TV.
Select the [PLAYBACK STD] and [COMP.OUT] settings according to the specifications you want to use for playback on a
When the playback standard selected is different from that of the original recording, no video will be output.