18Getting Started

Getting Started

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use.

Remove the battery terminal cover before attaching the battery pack

BATT. RELEASE switch

1Turn off the camcorder.

2Attach the battery pack to the camcorder.

Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place.

CHARGE indicator

3Connect the power cord to the compact power adapter.

4Plug the power cord into a power outlet.

5Connect the compact power adapter to the camcorder’s DC IN terminal.

The CHARGE indicator starts flashing. The indicator will stay on when the charging is completed.

You can also use the compact power adapter without attaching a battery pack.

When the compact power adapter is connected, even if a battery is attached its power will not be consumed.

ONCE THE BATTERY PACK IS FULLY CHARGED

1Disconnect the compact power adapter from the camcorder.

2Unplug the power cord from the power outlet and the compact power adapter.

TO REMOVE THE BATTERY PACK

Slide BATTERY RELEASE in the direction of the arrow and hold it pressed down. Slide the battery pack down and then pull it out.

IMPORTANT

You may hear some noise from the compact power adapter during use. This is not a malfunction.

We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of

0 °C to 40 °C (32 °F to 104 °F), the charging will not start.

Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder.

To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for