Canon HV20 Analog Line-InRecording, press, Select, Select, External, playback, Press FUNC, REC PAUSE] and, ) [EXECUTE] and press, Connected device: Start the

Connecting to a TV or VCR 71

Recording

1This camcorder: Load the recorded cassette.

2Connected device: Load a blank cassette or disc and set the device to record pause mode.

3This camcorder: Locate the scene you wish to copy and pause the playback shortly before the scene. When the connection is recognized "HDV/DV" will be displayed. When the video output starts, the display will change to "HDV-OUT" or

"DV-OUT" depending on the video output signal.

4This camcorder: Resume the movie playback.

When using an analog connection you can include in the copy the date, time and data code of the original recording, as well. Repeatedly press DISP. to change the on-screen display ( 57).

5Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete.

6This camcorder: Stop playback.

NOTES

We recommend powering the camcorder using the compact power adapter.

When recording to a VCR using an analog

connection –connection type 4 ( 66)–, the quality of the edited tape will be lower than that of the original.

When recording to a digital video recorder using the HDV/DV terminal –connection type ( 66)–:

- If the picture does not appear, disconnect the DV cable and restore the connection after a short while or turn the camcorder off and then on again.

-Proper operation cannot be guaranteed for all digital devices equipped with a DV terminal. If

the operation does not work, use the AV/ terminal.

You cannot record to an external device using the HDMI connection –connection type 3 –.

Analog Line-In Recording

You can input video from an analog video source (VCR, TV, etc.) and record the input video on the tape in the camcorder in DV standard. Analog video cannot be converted to HDV standard.

(10)

Connecting

Connect the camcorder to the video input source using an analog connection – connection type ( 66)– shown in the previous section Connection Diagrams.

Recording

Load a blank tape in the camcorder and load the recorded (source) tape or disc in the connected device.

FUNC.

(	23)			External
2	Select (	) [	REC PAUSE] and
1	Press FUNC. .
3	press (	).		Connections
	Select (	) [EXECUTE] and press
4	( ).
	Connected device: Start the
	playback.

In record pause mode and while recording you can check the picture on the camcorder’s screen.