TO SET SELF-CLEAN CYCLE:
1.Close oven door. Push CLEAN. The time display will show
TO INTERRUPT A CLEAN CYCLE:
1.Push CLEAR/OFF.
Follow Instructions under "WHEN A CLEAN
CYCLE IS FINISHED."
Fig. 1
2.Press L_ or L_ to set the desired length of clean time. Clean time is normally 3 hours. YOU can change it between 2 and 4 hours, depending on how
dirty the oven Is. See Fig. 2. The door locks automatically after the controls are set. The display will show "LOCK" when door locks.
Fig. 2
YOU can push STOP TIME to find OUt when the cycle will end. Push CLEAN to return to countdown.
WHEN A CLEAN CYCLE IS
FINISHED:
1.Walt until the LOCK display goes out. The oven temperature muSt drop to a safe level before the door can be opened. See Fig. 3.
WAIT UNTIL LOCK GOES OUT
Fig. 3
If you cannot open the door immediately after the word LOCK goes off, walt about one minute and try again.
TO SET DELAYED SELF-CLEAN CYCLE:
Follow steps
CYCLE," THEN:
3.Press STOP TIME.
4.Set the time of day when you want the clean cycle to end. See Fig, 4.
The control will calculate the start clean time.
Fig. 4
Note: When selecting a stop time for a delayed clean cycle, you must allow time for the
Your oven light should be OFF during a
14 |
