Charging Batteries
With the Compaq R6000 UPS in Standby Mode, allow the batteries to charge before putting the UPS into service. The battery status can be monitored using the LCD display. See Chapter 3, “Operation,” for more information on using the front panel controls and LCD display.
IMPORTANT: The battery packs will charge to:
■90% of their capacity within 4 hours.
■100% of their capacity within 24 hours.
Compaq recommends that you allow the batteries to charge for at least 24 hours before using them to supply backup power to your devices.
Installation is Now Complete
For information on operating the UPS, see Chapter 3, “Operation.”
For information on changing the configuration of the UPS, refer to Chapter 4, “Configuration.”
