Compaq R6000 Series manual Operation

iv Compaq R6000 Series UPS Operation and Reference Guide

Installation

continued
Installation Considerations	2-2
Weight	2-2
Position	2-2
Outline of Installation Procedure	2-3
Check Battery Recharge Label	2-4
Unpacking the UPS	2-4
Preparing the Rack	2-4
Assembling the Compaq R6000 UPS	2-5
Placing UPS in rack	2-5
Wiring the Compaq R6000 UPS	2-7
Code Compliance Information	2-7
Connecting the Remote Emergency Power Off Switch (REPO) Port	2-7
Connecting the Compaq R6000 UPS to AC Branch Circuit	2-9
Install and connect the battery packs	2-12
Installing Extended Runtime Modules (ERMs)	2-17
Connecting Communications Ports	2-18
Connecting Communication Ports to Other Devices	2-18
Installing and Connecting Communication Options	2-18
Connecting Loads	2-19
Load Segments Description	2-19
Configuring Load Segments	2-20
Attaching the Load Segments	2-20
Ordering Extra Power Cords	2-21
Completing the Assembly of the R6000 UPS in the Rack	2-22
Powering up the R6000 UPS	2-23
Turning on the Main Circuit Breaker	2-23
Pressing the ON button	2-23
Shutting Down the System	2-23
Charging Batteries	2-24
Installation is Now Complete	2-24

Chapter 3

Operation

Front Panel Controls	3-2
Front Panel Indicators	3-3
Front Panel LCD	3-3
Front Panel LEDs	3-4
Modes of Operation	3-5
Shutting Down the System	3-6
Initiating a Self-test	3-7
Audible Alarm	3-7
Silencing an Audible Alarm	3-8