Operation 3-5

Modes of Operation

The UPS has five modes of operation, indicated by the LEDs:

Standby Mode

On Utility Power: green LED

is flashing

On Battery Power: yellow LED

is blinking.

Power is not available at the UPS output receptacles.

The UPS monitors and charges batteries if required.

Operate Mode

Green LED is on.

Power is available at the UPS output receptacles.

The UPS monitors and charges batteries if required.

Bypass Mode

Green LED is on; yellow LED is on; a five-second interval audible alarm is active

Can be enabled manually by moving the Bypass switch (on the rear panel) from NORMAL to BYPASS.

Power is available at the UPS output receptacles.

Batteries are not monitored or charged.

 

BYPASS

 

 

 

 

BYPASS

NORMAL

 

 

 

 

 

NORMAL

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

2

 

 

 

 

1

 

 

 

3

 

 

 

 

2

3

 

 

1

2

 

 

 

1

 

 

 

5

 

 

 

 

5

5

 

4

4

4

 

5

 

 

1

4

2

3

 

 

 

 

 

 

 

 

1

 

2

 

3

 

 

&

 

 

 

 

 

4

 

 

 

 

Figure 3-4. Placing the Compaq R6000 UPS in Bypass Mode

Page 54
Image 54
Compaq R6000 Series manual Modes of Operation, Standby Mode