88Trouble?
List of Messages
Some error messages will disappear after being displayed for about 4 seconds.
Message | Explanation/Solution |
|
|
|
|
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
SET THE TIME ZONE, | You have not set the time zone, date and time. This message | 24 |
| ||
DATE AND TIME | appears each time you turn the power on until you set the time |
|
|
|
|
| zone, date and time. |
|
|
|
|
CHANGE THE BATTERY | Battery pack is exhausted. Replace or charge the battery pack. | 18 |
| ||
PACK |
|
|
|
|
|
THE TAPE IS SET FOR | Cassette is protected. Replace the cassette or change the position | 92 |
| ||
ERASURE PREVENTION | of the protect switch. |
|
|
|
|
REMOVE THE CASSETTE | Camcorder stopped operating to protect the tape. Remove the | 20 |
| ||
| cassette and reinsert it. |
|
|
|
|
CHECK THE HDV/DV | The DV cable is not correctly connected to the HDV/DV terminal, or | 66 |
| ||
INPUT | the connected digital device is turned off. |
|
|
|
|
(Appears only if a DV cable is |
|
|
|
|
|
The video input signal is in a different television system (PAL or |
| – | |||
connected) |
| ||||
SECAM). |
|
|
|
| |
|
|
|
|
| |
CONDENSATION HAS | Condensation has been detected in the camcorder. | 94 |
| ||
BEEN DETECTED |
|
|
|
|
|
CONDENSATION HAS | Condensation has been detected in the camcorder. Remove the | 94 |
| ||
BEEN DETECTED | cassette. |
|
|
|
|
REMOVE THE CASSETTE |
|
|
|
|
|
TAPE END | Tape reached the end. Rewind the tape or replace the cassette. |
| – | ||
INCORRECT TAPE | You attempted to play back a tape recorded in a different television |
| – | ||
SPECIFICATION | system (PAL or SECAM) or in a recording standard not supported |
|
|
|
|
| by this camcorder. |
|
|
|
|
INPUT SIGNAL NOT | The digital device connected with the DV cable is incompatible with |
| – | ||
SUPPORTED | the camcorder. |
|
|
|
|
PLAYBACK STD LOCKED | Current camcorder settings do not match the HDV/DV standard of | 40 |
| ||
INCOMPATIBLE VIDEO | the video input signal. Change the [PLAYBACK STD] setting to |
|
|
|
|
INPUT | match the video input signal. |
|
|
|
|
PLAYBACK STD LOCKED | Current camcorder settings do not match the HDV/DV standard of | 40 |
| ||
PLAYBACK IS | the recording you tried to play back. Change the [PLAYBACK STD] |
|
|
|
|
RESTRICTED | to match the recording standard of the tape. |
|
|
|
|
HEADS DIRTY, USE | Video heads are dirty. Clean the video heads. | 94 |
| ||
CLEANING CASSETTE |
|
|
|
|
|
NO CARD | There is no memory card in the camcorder. | 20 |
| ||
NO IMAGES | No images are recorded on the memory card. |
| – | ||
CARD ERROR | A memory card error occurred. The camcorder cannot record or |
| – | ||
| display the image. |
|
|
|
|
| The error may be temporary. If the message disappears after 4 |
|
|
|
|
| seconds and “ ” flashes red, turn the camcorder off, remove the |
|
|
|
|
| card and reinsert the card. If “ ” changes to green or yellow, you |
|
|
|
|
| can continue recording/playback. |
|
|
|
|
CARD FULL | Memory card is full. Erase some images to free some space or | 64 |
| ||
| replace the memory card. |
|
|
|
|