DISP.

Menu Options Lists 43

DISPLAY SETUP

BRIGHTNESS

Adjust ( ) the brightness of the LCD display with the joystick.

Changing the brightness of the LCD display does not affect that of the viewfinder or the recordings.

MARKERS

[ OFF], [ LEVEL(WHT)],

[ LEVEL(GRY)], [ GRID(WHT)],

[ GRID(GRY)]

You can display a grid or a horizontal line at the center of the screen. The markers are available in white or gray. Use the markers as a reference to make sure your subject is framed correctly (vertically and/ or horizontally).

Using the markers will not affect the recordings on the tape or memory card.

ASSIST FUNC.

[

OFF], [

ZEBRA(70%)],

[

ZEBRA(100%)], [

PEAKING]

You can use the assist functions to make sure you adjust the focus and exposure correctly.

[ZEBRA]: A striped pattern (zebra pattern) will appear over areas of the picture that are overexposed (too bright).

[ ZEBRA(70%)] is more sensitive

than [ ZEBRA(100%)].

[ PEAKING]: The silhouettes of objects in the picture will be emphasized

in order to allow you to focus manually more easily.

Using the assist functions will not affect the recordings on the tape or memory card.

AUDIO LEVEL

(

61)

[ ON], [ OFF]

TV SCREEN

[ ON]*, [ OFF]

When set to [ ON], the camcorder’s on-screen displays will appear also on the screen of a connected TV or monitor.

You can also use DISP. on the wireless controller.

When the the data code is displayed on the camcorder’s screen, the same information will also appear on a connected TV regardless of the [TV SCREEN] setting. Turn off the data code

display by repeatedly pressing .

*The default value is [ OFF] in the playback modes.

6SEC.DATE

[ ON], [ OFF]

When you start playing back a tape or when the date of the recording changes, the date and time will be displayed for 6 seconds.

DATA CODE

( 57)

[ DATE], [ TIME], [ DATE & TIME],

[ CAMERA DATA]

Advanced Functions

Page 43
Image 43
Canon HV20 instruction manual Gridgry, Off, Peaking, Camera Data