Using an Externally Mounted Flash (Sold Separately)

High-Power Flash HF-DC1

This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket.

Please read the instructions accompanying the flash along with this explanation.

Tripod

Sockets

Bracket

(Comes with the flash)

The flash charge time will lengthen as the battery charge gets weaker. Always set the power/mode switch to [OFF] when you finish using the flash.

Be careful not to touch the flash window or sensor windows with your fingers while the flash is in use.

The flash may fire if another flash is being used in close proximity.

The High-Power Flash may not fire outdoors in daylight or when there are no reflective items.

For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots.

Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both.

120

Page 122
Image 122
Canon I7 appendix Using an Externally Mounted Flash Sold Separately, High-Power Flash HF-DC1, 120