Canon I7 appendix Turn off the Camera and the TV Plug the ends of the AV, Cable into the Video

Viewing Images on a TV set

You can play back images on a television with the supplied AV cable.

1	Turn off the Camera and the TV.
2	Plug the ends of the AV			VIDEO
	cable into the VIDEO IN		Yellow	IN	AUDIO
	and AUDIO IN jacks on
	the TV.
				Black
3	Connect the AV cable to
	the camera station's A/V
	OUT terminal (	), set the
	mode switch to	(play-
	back) ( ), and place the
	camera securely into the
	camera station (	).
4	Turn on the TV and switch it to video mode.
5	Turn on the camera.

zYou can control the camera with the wireless controller (Basic Guide p. 6).

The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 27). The default setting varies between regions.

-NTSC: Japan, U.S.A., Canada, Taiwan and others

-PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly.

Viewing Images on a TV set

97