Canon ip3000 Setting Up, Preparing the Printer, Connecting the Printer to the Computer, USB cable

Place the printer on a flat surface.

Setting Up

1 Preparing the Printer

1

2 Remove the packing material and tape from the printer as shown.

The tape position is subject to change.

2 Connecting the Printer to the Computer

Either a USB cable or parallel printer cable is available for iP4000. For iP3000 the USB cable is only available. You cannot connect the computer to the printer using both the parallel cable AND the USB cable.

USB cable		Printer cable (parallel) (iP4000 only)
•	Windows XP, Windows Me,	• Windows NT 4.0, Windows 95
	Windows 2000, Windows 98	(Can also be used with Windows XP,
•	Mac OS 9.x or later	Windows Me, Windows 2000, and
		Windows 98.)

Recommended: Canon or other computer manufacturer cable, up to 5 meters in length.

Should conform with Centronics IEEE 1284 and support bi-directional communication. Recommended: Canon or other computer manufacturer cable, up to 2 meters in length.

•The USB cable delivers relatively faster printing speeds and is recommended for use with Windows XP, Windows Me, Windows 2000, and Windows 98.

•If your computer has an earth connection, make sure that this is attached.

•If you do not intend to use the printer for a long period of time, unplug the power cord from the power outlet after turning off the printer.

2