13
Push the Carriage Cover down toward the front.
14
Close the Top Cover.
Ink now fills the system. It takes about nine minutes
to complete.
Important
While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak
out.
Note
The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute Initial adjustmt in Head Posi. Adj. in the Control Panel menu.
(See "Adjustment When Installing the Printhead.") P.523
15
Feed paper by following the instructions on the Display Screen.
After the paper has advanced, Initial adjustmt in Head Posi. Adj. is executed automatically.
iPF8400SE
Replacing the Printhead
User's Guide
Maintenance and Consumables Printheads
553