1
On the Tab Selection screen of the Control Panel, press or to
select the Settings/Adj. tab ( ).
Note
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press or to select Maintenance, and then press the OK button.
4
Press or to select Replace P.head, and then press the OK button.
Ink begins being drawn in. When it finishes, instructions are displayed on the Display Screen.
It takes about three minutes to complete.
Replace the Printhead
1
Open the Top Cover.
2
If the Carriage Cover is dirty, use a damp cloth that
you have wrung out completely to wipe it clean.
Replacing the Printhead
iPF8400SE
User's Guide
Maintenance and Consumables Printheads
548