9
Access the Page Setup pane.
10
Select and click a roll paper in the APaper Source list.
11
Select the paper width of the roll loaded in the printer for BRoll Width. In this case, ISO A2/A3 (420.0mm)
is selected.
12
Make sure the CPage Size setting matches the orig-
inal size as selected in CPaper Size in the Page At-
tributes dialog box—in this case, ISO A4.
13
Select the DEnlarged/Reduced Printing check box.
14
Click GScaling and enter 120.
Note
•You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the
paper will not be printed.
•If the original size after enlargement or reduction is smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center originals by selecting the JPrint Centered check box.
15
Confirm the print settings, and then click MPrint to start printing.
Note
•For tips on confirming print settings, see "Confirming Print Settings ." ➔P.251
Resizing Originals by Entering a Scaling Value (Mac OS)
iPF8400SE
User's Guide
Enhanced Printing Options Printing enlargements or reductions
60