Changing the Color and Shooting
You can change the look of an image when shooting. However, the shooting conditions may cause the image to become coarse, or the colors may not come out as expected.
T Color Accent 
You can select to retain a single color and change the rest to black and white in a composition.
Select T.
●Follow Step 2 on p. 56 to select T.
Hold the n button pressed.
●The unchanged image and the Color Accent image will both display.
●The color for default settings is green.
Specify the color.
●Position the center frame so it is filled with
the color you want and press the qbutton.
XThe specified color will be recorded.
|
| Specify the range of colors. |
Recorded | color | ● Press the opbuttons or turn the Âdial |
|
| to change the range of colors to be |
|
| retained. |
●Select a negative value to limit the range of colors. Select a positive value to extend the range of colors to similar colors.
●Pressing the n button accepts the setting and restores the shooting screen.
• Using the flash may cause unexpected results in this mode.
• The recorded color will be saved even if you turn off the power.
88
