IMPORTANT

You must install the software and driver bundled on the supplied Canon Digital Camera Solution Disk onto your computer before connecting the camera to a computer.

The camera will not operate correctly if you connect it to your computer before installing the driver and software. If this happens, please refer to the Troubleshooting section of the Canon Digital Camera Software Starter Guide Disk.

• You do not need to turn off the camera or computer power when making a USB connection.

Please refer to your computer’s manual for information regarding the location of the USB port.

You are recommended to use a fully charged battery pack or the AC Adapter Kit ACK-DC10 (sold separately) to power the camera when connecting to a computer (p. 21).

All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.

1Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk (first time only).

Please see the Canon Digital Camera Software Starter Guide Disk for the installation procedures.

With a Macintosh, it is next necessary to set the ImageBrowser auto start settings. Please see the Canon Digital Camera Software Starter Guide Disk for details.

2Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal.

USB Port

DIGITAL Terminal

Interface Cable

134

Page 136
Image 136
Canon IXUS 30, IXUS 40 manual 134