5 Slide the mode switch to

(Shooting), (Movie) or (Playback).

6 Press the ON/OFF button until the power lamp lights green.

• The image will appear on the TV. Shoot or play back images as usual.

Power Lamp• Press the DISP. button when images are not being displayed on the TV when shooting.

• A TV set cannot be used in Stitch Assist mode.

No image will appear on the LCD monitor when the camera is connected to a TV.

If the TV is a stereo model, you can plug the audio plug into either the left or right Audio In jack. Please refer to the TV’s manual for details.

The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 56). The default setting varies between regions.

-NTSC: Japan, U.S.A., Canada, Taiwan and others

-PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly.

Viewing Images on a TV set

141

Page 143
Image 143
Canon IXUS 40, IXUS 30 manual Slide the mode switch to Shooting, Movie or Playback, 141